.. MediaGoblin Documentation Written in 2011, 2012, 2013, 2014, 2015 by MediaGoblin contributors To the extent possible under law, the author(s) have dedicated all copyright and related and neighboring rights to this software to the public domain worldwide. This software is distributed without any warranty. You should have received a copy of the CC0 Public Domain Dedication along with this software. If not, see . ========================================= Considerations for Production Deployments ========================================= This document contains a number of suggestions for deploying MediaGoblin in actual production environments. Consider ":doc:`deploying`" for a basic overview of how to deploy MediaGoblin. Deploy with paste ----------------- The MediaGoblin WSGI application instance you get with ``./lazyserver.sh`` is not ideal for a production MediaGoblin deployment. Ideally, you should be able to use a systemd service file or an init script to launch and restart the MediaGoblin process. We will explore setting up MediaGoblin systemd service files and init scripts, but first we need to create the directory that will store the MediaGoblin logs. .. _create-log-file-dir: Create the directory for your log file: --------------------------------------- Production logs for the MediaGoblin application are kept in the ``/var/log/mediagoblin`` directory. Create the directory and give it the proper permissions:: sudo mkdir -p /var/log/mediagoblin && sudo chown -hR mediagoblin:mediagoblin /var/log/mediagoblin .. _systemd-service-files: Use systemd service files ------------------------- If your operating system uses systemd, you can use systemd ``service files`` to manage both the Celery and Paste processes. Place the following service files in the ``/etc/systemd/system/`` directory. The first file should be named ``mediagoblin-celeryd.service``. Be sure to modify it to suit your environment's setup: .. code-block:: bash # Set the WorkingDirectory, Environment and ExecStart values to match your environment. # If using Debian/Ubuntu, mkdir and chown are located in /bin/mkdir and /bin/chown, respectively. # If using Fedora/CentOS/Red Hat, mkdir and chown are located in /usr/bin/mkdir and /usr/bin/chown, respectively. [Unit] Description=Mediagoblin Celeryd [Service] User=mediagoblin Group=mediagoblin Type=simple WorkingDirectory=/srv/mediagoblin.example.org/mediagoblin # Create directory for PID (if needed) and set ownership ExecStartPre=/bin/mkdir -p /run/mediagoblin ExecStartPre=/bin/chown -hR mediagoblin:mediagoblin /run/mediagoblin # Celery process will run as the `mediagoblin` user after start. Environment=MEDIAGOBLIN_CONFIG=/srv/mediagoblin.example.org/mediagoblin/mediagoblin_local.ini \ CELERY_CONFIG_MODULE=mediagoblin.init.celery.from_celery ExecStart=/srv/mediagoblin.example.org/mediagoblin/bin/celery worker \ --logfile=/var/log/mediagoblin/celery.log \ --loglevel=INFO PIDFile=/run/mediagoblin/mediagoblin-celeryd.pid [Install] WantedBy=multi-user.target The second file should be named ``mediagoblin-paster.service``: .. code-block:: bash # Set the WorkingDirectory, Environment and ExecStart values to match your environment. # If using Debian/Ubuntu, mkdir and chown are located in /bin/mkdir and /bin/chown, respectively. # If using Fedora/CentOS/Red Hat, mkdir and chown are located in /usr/bin/mkdir and /usr/bin/chown, respectively. [Unit] Description=Mediagoblin [Service] Type=forking User=mediagoblin Group=mediagoblin Environment=CELERY_ALWAYS_EAGER=false WorkingDirectory=/srv/mediagoblin.example.org/mediagoblin # Start mg-paster process as root, then switch to mediagoblin user/group PermissionsStartOnly=true ExecStartPre=-/bin/mkdir -p /run/mediagoblin ExecStartPre=/bin/chown -hR mediagoblin:mediagoblin /run/mediagoblin ExecStart=/srv/mediagoblin.example.org/mediagoblin/bin/paster serve \ /srv/mediagoblin.example.org/mediagoblin/paste_local.ini \ --pid-file=/var/run/mediagoblin/mediagoblin.pid \ --log-file=/var/log/mediagoblin/mediagoblin.log \ --daemon \ --server-name=fcgi fcgi_host=127.0.0.1 fcgi_port=26543 ExecStop=/srv/mediagoblin.example.org/mediagoblin/bin/paster serve \ --pid-file=/var/run/mediagoblin/mediagoblin.pid \ /srv/mediagoblin.example.org/mediagoblin/paste_local.ini stop PIDFile=/var/run/mediagoblin/mediagoblin.pid [Install] WantedBy=multi-user.target Enable these processes to start at boot by entering:: sudo systemctl enable mediagoblin-celeryd.service && sudo systemctl enable mediagoblin-paster.service Start the processes for the current session with:: sudo systemctl start mediagoblin-paster.service sudo systemctl start mediagoblin-celeryd.service If either command above gives you an error, you can investigate the cause of the error by entering:: sudo systemctl status mediagoblin-celeryd.service or sudo systemctl status mediagoblin-paster.service The above ``systemctl status`` command is also useful if you ever want to confirm that a process is still running. If you make any changes to the service files, you can reload the service files by entering:: sudo systemctl daemon-reload After entering that command, you can attempt to start the Celery or Paste processes again. .. _init-script: Use an init script ------------------ If your system does not use systemd, you can use the following command as the basis for an init script: .. code-block:: bash CELERY_ALWAYS_EAGER=true \ /srv/mediagoblin.example.org/mediagoblin/bin/paster serve \ /srv/mediagoblin.example.org/mediagoblin/paste.ini \ --pid-file=/var/run/mediagoblin.pid \ --server-name=fcgi fcgi_host=127.0.0.1 fcgi_port=26543 The above configuration places MediaGoblin in "always eager" mode with Celery, this means that submissions of content will be processed synchronously, and the user will advance to the next page only after processing is complete. If we take Celery out of "always eager mode," the user will be able to immediately return to the MediaGoblin site while processing is ongoing. In these cases, use the following command as the basis for your script: .. code-block:: bash CELERY_ALWAYS_EAGER=false \ /srv/mediagoblin.example.org/mediagoblin/bin/paster serve \ /srv/mediagoblin.example.org/mediagoblin/paste.ini \ --pid-file=/var/run/mediagoblin.pid \ --server-name=fcgi fcgi_host=127.0.0.1 fcgi_port=26543 Members of the MediaGoblin community have provided init scripts for the following GNU/Linux distributions: Debian * `GNU MediaGoblin init scripts `_ by `Joar Wandborg `_ Arch Linux * `MediaGoblin - ArchLinux rc.d scripts `_ by `Jeremy Pope `_ * `Mediagoblin init script on Archlinux `_ by `Chimo `_ You can reference these scripts to create an init script for your own operating system. Similar scripts will be in your system's ``/etc/init.d/`` or ``/etc/rc.d/`` directory, but the specifics of an init script will vary from one distribution to the next. Separate celery --------------- MediaGoblin uses `Celery`_ to handle heavy and long-running tasks. Celery can be launched in two ways: 1. Embedded in the MediaGoblin WSGI application [#f-mediagoblin-wsgi-app]_. This is the way ``./lazyserver.sh`` does it for you. It's simple as you only have to run one process. The only bad thing with this is that the heavy and long-running tasks will run *in* the webserver, keeping the user waiting each time some heavy lifting is needed as in for example processing a video. This could lead to problems as an aborted connection will halt any processing and since most front-end web servers *will* terminate your connection if it doesn't get any response from the MediaGoblin WSGI application in a while. 2. As a separate process communicating with the MediaGoblin WSGI application via a `broker`_. This offloads the heavy lifting from the MediaGoblin WSGI application and users will be able to continue to browse the site while the media is being processed in the background. .. _`broker`: http://docs.celeryproject.org/en/latest/getting-started/brokers/ .. _`celery`: http://www.celeryproject.org/ .. [#f-mediagoblin-wsgi-app] The MediaGoblin WSGI application is the part that of MediaGoblin that processes HTTP requests. To launch Celery separately from the MediaGoblin WSGI application: 1. Make sure that the ``CELERY_ALWAYS_EAGER`` environment variable is unset or set to ``false`` when launching the MediaGoblin WSGI application. 2. Start the ``celeryd`` main process with .. code-block:: bash CELERY_CONFIG_MODULE=mediagoblin.init.celery.from_celery ./bin/celeryd If you use our example systemd ``service files``, Celery will be set to the "CELERY_ALWAYS_EAGER=false" value by default. This will provide your users with the best user experience, as all media processing will be done in the background. .. _sentry: Set up sentry to monitor exceptions ----------------------------------- We have a plugin for `raven`_ integration, see the ":doc:`/plugindocs/raven`" documentation. .. _`raven`: http://raven.readthedocs.org .. TODO insert init script here .. TODO are additional concerns ? .. Other Concerns .. --------------